搜索资源列表
led
- FPGA和VHDL的全过程和源码,有助你对FPGA和VHDL的认识和学习!
VHDL
- vhdl的很多例子,包括LED、lcd、按键、数码管等等,非常的实用。
LED控制VHDL程序与仿真
- FPGA驱动LED静态显示 FPGA驱动LED动态显示(4位)
pinlvji 频率计VHDL编程
- 频率计VHDL编程。设计一个4位数字显示的十进制频率计,其测量范围为1MHz,测量值通过4个数码管显示以8421BCD码形式输出,可通过开关实现量程控制,量程分10kHz、100kHz、1MHz三档(最大读数分别为9.999kHz、99.99kHz、999.9kHz); 当输入信号的频率大于相应量程时,有溢出显示。 -Cymometer VHDL programming. Design of a 4-digit decimal display frequency, the measu
daima.用VHDL语言设计一个数字秒表
- 用VHDL语言设计一个数字秒表: 1、 秒表的计时范围是0秒~59分59.99秒,显示的最长时间为59分59秒。 2、 计时精度为10MS。 3、 复位开关可以随时使用,按下一次复位开关,计时器清零。 4、 具有开始/停止功能,按一下开关,计时器开始计时,再按一下,停止计时。系统设计分为几大部分,包括控制模块、时基分频模块、计时模块和显示模块等。其中,计时模块有分为六进制和十进制计时器。计时是对标准时钟脉冲计数。计数器由四个十进制计数器和两个六进制计数器构成,其中毫秒位、十毫秒位、秒位和
DE2.rar
- 使用 DE2板制作的多功能数字钟,含有选择功能,秒表,电子表,闹钟,用7-segment LED液晶显示,可以通过LCD看当时状态 附有仿真波形,-Clk_Div,- Mode_Select,-Watch,-stop_watch,-Lcd_Module,-Total_Out source code,Simulation waveform
key_4x4.rar
- 4x4键盘结合LED动态显示,里面包含了键盘扫描、2进制转10进制BCD码、LED编码和LED动态显示,4x4 keyboard combination LED dynamic display, which contains the keyboard scan, 2 to 10 hexadecimal BCD hex code, LED codes and LED dynamic display
led.rar
- 跑马灯 简单实用很适合初学者 希望对大家有用,Marquee is simple and practical very suitable for beginners want to be useful to everyone
TLC549
- verilog TLC549AD采样程序 ,速度200K,在LED和数码管上显-verilog TLC549AD sampling procedures, the speed of 200K, in the LED and digital tube significantly
ADC_Fre_counter_LED_keyboard
- FPGA tlc0820采样控制 高精度测频 LED键盘显示 VHDl 调试与EP1C3-FPGA vhdl ADC LED keyboard frequency counter test
VHDL_electronic_organ
- 简易电子琴,可以弹奏音乐。本课程设计主要内容是基于VHDL语言并利用数控分频器设计硬件电子琴,利用GW48作为课程开发硬件平台,键1至键8设计为电子琴键。某一个LED显示当前的按键的音节数。-Simple organ, can play music. The main contents of this curriculum design is based on the VHDL language and the use of digital hardware design divider org
CLOCK
- 文通过ALTERA公司的quartus II软件,用Verilog HDL语言完成多功能数字钟的设计。主要完成的功能为:计时功能,24小时制计时显示;通过七段数码管动态显示时间;校时设置功能,可分别设置时、分、秒;跑表的启动、停止 、保持显示和清除。-Through the ALTERA company quartus II software, using Verilog HDL language to complete the design of multi-function digital
lift
- 设计一个八层楼房自动电梯控制器,用八个 LED显示电梯行进过程,并有数码管显示电梯当前所在楼层位置,在每层电梯入口处设有请求按钮开关,请求按钮按下则相应楼层的LED 亮。 -Design a controller, eight-story buildings, escalators, moving elevator with eight LED display process, and a digital display where the floor lift the current loc
DE0_NANO_GSensor
- 该代码利用DE0 nano上面的ADI ADXL345三轴重力传感器实现重力感应,根据偏转角度的不同点亮相应方向上面的LED灯,稍加修改,还能够将各个方向上面的重力加速度值实时显示,希望大家喜欢-The code used DE0 nano gravity above the ADI ADXL345 three-axis accelerometer sensors to achieve according to the deflection angle of light in different
VHDL_code
- 基于FPGA的AD,DA,LCD,LED,CAN,I2C,PS2,VGA以及一些通讯ASK,FSK等的VHDL源程序,所有程序已通过调试,需要的拿走。-FPGA-based AD, DA, LCD, LED, CAN, I2C, PS2, VGA, and some communications ASK, FSK, etc. VHDL source code, all procedures have been debugging, need to take.
ps2
- 采用sopc技术,nios2ide开发环境,实现nios对ps2键盘的控制,按键讲ascii码显示在led上-Using sopc technology, nios2ide development environment to achieve nios right ps2 keyboard control, key speakers led the ascii code is displayed in
01.ISE8.2
- 这个是我用的合众达试验箱里面的资料。合众达试验箱里面集成的是xilinx的virtex4,这个是在ise环境中审计的程序,包括led,da/ad转换实验,键盘实验,以及rtc读取和lcd显示等。-vhdl programs that used by xilinx virtex4
LED
- VHDL代码控制流水灯交替点亮的入门程序-VHDL Control LED
E1-FramerDeframer
- E1 Framer/Deframer,E1 framer Deframer core implements CCITT (ITU) recommedations G.704,G.706 and G.732 for 30 channel multiplexed E1 stream at 2.048Mbps rate. Note:This project is part of the OpenStacks initiative at the Telecom Software Laborator
VHDLprogram
- VHDL的程序包,包括LED控制,LCD控制、DAC0832接口电路、URAT、FSK\PSK\MASK调制、波形发生器等。适合工程参考-VHDL package, including the LED control, LCD control, DAC0832 Interface Circuit, URAT, FSK \ PSK \ MASK modulation, such as waveform generator. Reference for the project